SELECTED PUBLICATIONS:
Lee, S.W., and Y. Liu, "Robust Experimental Design/Regression
Model
Development for
FBC Design and Manufacturing", to be published in
the
Proceedings of Flexible
Automation And Intelligent Manufacturing
(FAIM
2000), College
Park, MD, June, 2000.
Lee, S.W., and Y. Liu, "Investigation of Gas/Particle Flows in a
Gaseous Fluidized
Bed Using Laser-based Particle Image
Velocimetry",
published in
the Proceedings of 3rd International Workshop / Symposium
on
Particle Image Velocimetry,
Santa Barbara, CA, pp. 689-694, Sept.
1999.
Liu, Y., G.Chen and S.W. Lee, "Factorial Impacts Analysis on Particle
Velocity in
FBC Cold Model by Laser-based PDPA and Robust
Experimental
Design", published
in the Proceedings of 5th ISSAT International
Conference on Reliability and Quality
in Design, pp. 201-205, August
1999.
Saliard, S. and S.W. Lee, "Development and Evaluation of a
cogeneration
Capability at Morgan State University", presented at 1999
Science, Engineering and Mathematics
Undergraduate Research Symposium,
Proceedings of Symposium, pp.11, July 29, 1999.
Lee, S.W., and Y. Liu, “Laser-based PIV and PDPA Applications for Gas/Solid Flow
Measurement in the FBC”, Presented at Energy Sources Technology Conference and
Exhibition (ETCE) ’99, Houston, TX, Feb. 1999.
Johnson, K., Tribble.A, S.W. Lee, and G.Q. Zhang, “Advanced Combustion Test and
Computer Simulation”, presented at 5th Annual Undergraduate Research Symposium and Awarded
First Prize, Proceedings of Symposium, pp.20-21, April 20, 1998
Lee, S.W., and B.Q. Wang, "Effect of Thermal Spray Coating on In-Bed Tube Erosion in
FBC", presented and published in the Proceedings of ETCE 98 Conference, Feb. 2-4, 1998.
Lee, S.W., G.Q. Zhang and S. Mukira, "Experimental Study/Numerical Simulation of the
Flow Structure in the CFB System", Proceedings of 6th Annual HBCU/OMI, Energy R&D
Technology Transfer Symposium, pp. 1-10, April 27-29, 1998.
Wang, B.Q. and S.W. Lee, "Elevated Temperature Erosion of Several Thermal-Sprayed
Coatings under the Simulated Erosion Conditions of In-Bed Tubes in FBC", Intl' J. of Wear,
No.203-204, pp.580-587, 1997.
Lee, S.W. et al, "Development of the Instrumentation/Modeling for Heat Transfer
Characteristics in CFBC, Proceedings of 5th Annual HBCU/Other Minority Institution Program,
Energy R&D Technology Transfer Symposium, pp.16-22, March 1997.
J. Perry, S. Mukira, and S.W. Lee, "Development of the Design/Instrumentation of the
Advanced Combustor for High Efficiency/Low Emission", presented at 1996
National Technical
Association (NTA) Conference and Awarded First Prize, Oct. 17-20, 1996, Cleveland, OH.
Lee, S.W. et al., "Erosion Phenomena of the Low Carbon Steel and Thermal Sprayed
Coatings at Low Elevated Temperature", Proceedings of ASME Fluids Engineering Summer
Conference, Vol.236, pp.767-772, July 1996.
Aliniece, D., S. Mukira, and S.W. Lee, "Innovative Design/Instrumentation of Advanced
Swirling Fluidized Bed Combustor System, presented at 4th Annual DOE Undergraduate Science
Competition and Awarded First Prize, April 1996
Aliniece, D., S. Mukira, and S.W. Lee, "Advanced Design/Instrumentation of Advanced
Combustor for High Efficiencies/Low Emissions”, presented at 3th Annual Undergraduate
Research Symposium, and Awarded First Prize, Proceedings of Symposium, pp.15-17, March 14, 1996.
Lee, S.W. et al., “Effect of Thermal Sprayed Coatings on In-Bed Tube Erosion and Corrosion
in FBCs”, Proceedings of the NACE International Conference and Corrosion Show, pp.147/1-
147/9, March 1996.
Lee, S.W. and B.Q. Wang, "Effect of Particle-Tube Collision Frequency on Material Wastage
of In-bed Tubes in BFBC", International Journal of Wear, Vol. 184, pp. 223-229, 1995.
Lee, S.W., “Analysis of Erosion Phenomena of AISI 1018 Steel and Anti-Erosion Methods in
In-bed Tubes of FBC”, presented at the third Annual HBCU and Development Technology
Transfer Symposium", April 27-29, 1995, Atlanta, GA.
Lee, S.W., "Effect of Solid-Bed Particles on the Material Wastage of In-Bed Tubes in the
FBC", Presented at Fluids Engineering. Annual Conference & Exhibition, South Carolina, August
13-18, 1995, Book FED-Vol. 228, pp. 191-194.
Lee, S.W., and B.Q. Wang, "Erosion of AISI 1018 Steel and Several Thermal Sprayed
Coatings under Simulated In-Bed Tube Erosion Conditions of Fluidized Bed Combustors",
presented at 13th Int’L Conference FBC. Kissimmee, FL, May 7-10, 1995, Book FBC-Vol. 2, pp
. 1427-1432.
Lee, S.W., "An Experimental Study of Material Wastage of AISI 1018 Steel at Elevated
Temperature Condition", Proceedings of E&A 1995 Symposium, Houston, TX, Jan. 1995, Vol.2
pp.577-582.
Lee, S.W., "Design and Laboratory Projects in Thermal Science and Industrial
Technologies", Textbook in the Areas of Thermal Science and Industrial Technologies
Laboratory/Design Courses. 23 Chapters, 185 pages, MSU Press 3rd Edn., 1999.
Lee, S.W., "The Advantage/Effectiveness of the Assigning Semester Lab Projects to Different
Engineering Majors for Thermodynamics Class", Proceeding of American Society of Engineering
Education, 1994 Fall Conference of Middle Atlantic Section, Hempstead, NY, November 1994,
Vol. 1, pp. 155-160.
Lee, S.W., “Erosion and its Remedies for In-Bed Tubes in BFBC”, presented at the Second
Annual HBCU and Private Sector Energy Research and Development Technology Transfer
Symposium, Birmingham, Alabama, April 18-22, 1994.
Lee, S.W., and S. Nieh, "An Experimental Study of Gas-Solid Flow on Erosion of AFBC
System" ASME, book, No. H00806, Edited by D.E. Stock, et al., FED-Vol.166, pp. 273-28, 1993.
Nieh, S., S.W. Lee, S.Y. Lin, and T. Fu, "Measurement of In-Bed Tube Bundle Erosion and
Particle-Tube Collision Frequency in a Gas Fluidized Bed", J. of Particle Science & Technology
. Vol. 6, pp. 269-283, 1988.
(PRESS CTR + REFRESH/RELOAD IF PAGE DOES NOT LOAD PROPERLY.)